Controlled atmosphere tubular resistance furnace (high temperature)

　　Product introduction

　　WEF series laboratory high temperature furnace has complete performance design, safety and practicality to achieve the best results.

◆The maximum temperature is 1600°C, 1700°C.

◆ Using double furnace structure, other furnace roof construction technology, not only has the characteristics of fast heating speed, but also has the characteristics of overtemperature without collapsing and high temperature without falling ash; Insulation materials and other thermal insulation designs for inorganic fiber furnaces produced by vacuum forming technology.

◆MoS i2 rod is set on both sides of the furnace, which is easy to replace.

◆The furnace body is a double-layered carbon steel shell, with air circulation and heat insulation, and the outer surface temperature is low.

◆Thyristor control, transformer voltage regulation, PID parameter self-tuning function, manual/automatic interference-free switching function, programmable 50 time periods, can meet the requirements of continuous constant temperature and temperature control.

◆ With over-temperature alarm function, with built-in parameter password control function.

◆ Vacuum atmosphere type adopts stainless steel sealing kit and * corundum tube, good sealing effect, vacuum degree -0.098MP a.

◆ The heating rate is 0-15 °C/min, the heating speed is fast, the energy consumption of the empty furnace is small, and the energy saving is more than 50%.

◆High temperature control accuracy, display accuracy ± 1°C; The punching temperature value is less than 3 °C, and the temperature uniformity is ± 6 °C.

◆ A variety of safety protection design, good safety performance, long service life.

◆Simple structure, beautiful and generous.

　　Additional configuration

　　◆Optional ordinary corundum tube and 99 corundum tube ◆Optional 2XZ-1 rotary vane vacuum pump

       ◆Optional glass rotameter and gas mass flowmeter             ◆You can choose * quality carbon steel electrostatic spraying or stainless steel type

　　Technical parameters