Nitriding shuttle electric heating furnace

Product use

　　Mainly used for sintering of nitride products

Product Features

◆Nitride electric heating furnace is mainly composed of furnace body, insulation material, heating element, automatic control, system, glue drainage and exhaust gas recovery system, trolley system, track system, cooling system, thermocouple, vacuum system, etc.

◆The heating system can be heated by silicon molybdenum rod and zirconium diboride composite ceramic heating element.

◆ You can design a furnace body, multiple material trolleys, or you can design a control system and control two furnace bodies.

◆* High temperature 1500 °C, use temperature 1450 °C, it takes 6 hours to rise from room temperature to 1450 °C, from 1450 °C to 400 °C less than 60 hours.

◆The production cycle of each batch of single furnace is 5-7 days.

◆The thermal insulation material is aluminum silicate ceramic fiber material, with small thermal conductivity, small hot melt, fast heating speed, power saving and labor-saving, low production cost per unit output, and short production cycle of a single batch.

◆The track is set below ground level, the transport truck moves on the transverse track, and the material truck enters and exits the furnace body in the longitudinal direction, and enters and exits the material loading and unloading vehicle space.

◆ The vacuum system is mainly used to extract the air in the furnace and exchange air, you can use nitrogen cylinders, you can also make your own nitrogen.

◆ The cooling system is mainly used for rapid cooling and improving production.

◆The product sintering is completed under micro-positive pressure, first vacuum, rise to above 400 °C, rush nitrogen into the furnace, open the outlet valve at 800 °C to discharge waste gas and impurities, the temperature rises to 1450 °C for heat preservation, and cools down after the end of insulation.