Bell furnace, lift furnace

WEF series laboratory high temperature furnace has complete performance design, safety and practicality to achieve the best results.

◆The maximum temperature is 1000°C, 1300°C, 1600°C, 1700°C

◆ Using double furnace structure, other furnace roof construction technology, not only has the characteristics of fast heating speed, but also has the characteristics of overtemperature without collapsing and high temperature without falling ash; Inorganic fibers produced by vacuum forming technology are used as insulation materials for furnaces and other thermal insulation designs.

◆The MoSi 2 rod used in the 1600°C bell furnace is set around the furnace, which is easy to replace and operate.

◆The furnace body is a double-layered carbon steel shell, with air circulation and heat insulation, and the outer surface temperature is low.

◆ Triac control, transformer voltage regulation, PID parameter autotuning function, manual/automatic interference-free switching function, overtemperature alarm function, with temperature compensation and temperature correction function.

◆Good furnace uniformity, high firing rate and high production efficiency.

◆ The heating speed is 0-15°C/min, and the programmable 50-segment automatic control of the temperature rise.

◆High temperature control accuracy, display accuracy of 1°C; The punching temperature value is less than 3 °C.

◆A variety of safety * protection design, good safety * performance, long service life

◆ You can choose paperless recorder, or RS232 communication interface, realize on-site control through computer, and realize paperless recording of historical data and heating curve.

◆ Two furnace bottoms can be selected to be set on the track, and the furnace bottom is moved out horizontally along the track.

◆ Free on-site commissioning, on-site training, free fire door.

Additional configuration

◆Optional exhaust chimney 

◆Optional atmosphere type, optional gas flow meter 

◆Spare parts