1 the outer shell according to the principle of mechanics, choose the appropriate steel, steel plate, according to the scientific combination of welding and become, the whole strong, firm, durable, reliable, the surface of the plastic spraying corrosion, the appearance of the overall beautiful and generous.

2. The inner furnace lining is made of high-quality cold-rolled steel plate by bending and processing, plastic spraying on the outside, and the outer furnace shell does not contact, between the formation of air convection insulation layer, reducing the temperature of the outer furnace shell.

3. Morgan fiber on the door and the mouth of the furnace with multi-step labyrinth sealing, the structure to ensure that the door in the production process is always in a sealed state, eliminating the high-temperature furnace gas is escaping, improve the working environment, and enhance the energy-saving effect.

4. The hearth is made of imported composite Morgan fiber materials constructed through a unique process, strong thermal shock resistance, strong resistance to rapid cooling and heating, good corrosion resistance, no collapse, no crystallization, no slagging, no pollution, long service life of the structure has a low thermal conductivity, low thermolysis, excellent chemical stability, thermal stability, resistance to thermal vibration, excellent tensile strength and corrosion resistance.

5. High-quality refractory fiber cotton insulation layer will be wrapped up in the furnace, reducing heat loss while also playing a significant role in energy conservation.

6. Furnace heating element using high-quality silicon molybdenum rods, respectively, vertically hanging installed on both sides of the furnace chamber, using special mold processing production, to ensure that no damage in the processing, hanging, its structural form of easy to install, maintenance, replacement of fast, and the furnace shell will never form a thermal short-circuit caused by the phenomenon of furnace shell local overheating. To ensure that the fiber surface is not in direct contact with the silicon molybdenum rod, thereby increasing the effect of silicon molybdenum rod heat.

7, compared with the fuel furnace is easy to get high temperature.

8, control accuracy: ± 1 ℃; furnace temperature uniformity: ± 1 ℃ (according to the size of the heating chamber).

9, easy to operate, programmable, PID self-tuning, automatic heating, automatic insulation, automatic cooling, no need for guarding; can be operated through the computer box-type resistance furnace (start the box-type resistance furnace, stop the box-type resistance furnace, pause the heating, set the heating curve, the heating curve storage, history curve, etc.).

10, electric furnace without fuel furnace exhaust heat loss, so high thermal efficiency.

11, fast heating (heating rate 1 ℃ / h to 40 ℃ / min adjustable).

12、Energy-saving(Furnace chamber is made of imported fiber, which is resistant to high temperature and rapid heat and cold).

13, the furnace body by the exquisite spray plastic corrosion-resistant acid and alkali, the furnace body and furnace chamber isolation using air-cooled furnace wall temperature close to room temperature.

14, dual circuit protection (over-temperature, over-pressure, over-flow, section of the even, power failure, etc.).

15, the hearth material imported refractory, good insulation performance, high temperature resistance, resistance to rapid cooling and heating.

16、Temperature categories: 1000 ℃, 1200 ℃, 1400 ℃, 1600 ℃, 1700 ℃, ultra-high temperature 1800 ℃ - 3000 ℃