Hello! Welcome, we wholeheartedly provide you with roller hearth furnaces, mesh belt furnaces, push plate furnaces, experimental electric furnaces, and so on!
Customized consultation hotline 186-3797-9800
当前位置: 首页 > 常见问题  > FAQ Category

How does a Muffle stove work? How to use and precautions?

2023/12/27 9:48:16

How does a Muffle stove work? How to use and precautions?

How does a Muffle stove work? How to use and precautions?


After we receive the Muffle furnace, we will start to enter the use phase, so how to use the Muffle furnace? Today we will take a look at its use methods and precautions are what!




First, the correct use of Muffle furnace




1, the fixed socket behind the controller is connected with the high temperature furnace, the plug behind the controller is connected with the 220V AC power supply, the power supply is connected to the male knife switch and fuse box and other devices. The outer layer of the high temperature furnace is connected with the ground wire to ensure safety.




2. Insert the thermocouple into the high temperature furnace, and the two connecting wires of the thermocouple are respectively connected to the red and black terminals on the controller.


3, when in use, turn on the power switch, the red indicator light is on, indicating that the furnace has been energized, the temperature control key is adjusted to the required temperature, you can automatically set the temperature. When the temperature rises until the temperature pointer rises to the constant temperature pointer, the red light goes out, indicating that the work is normal.




4, after the use, as long as the control power switch to the "off" position, the power supply in the furnace is all cut off, while the switch is pulled down, more safe.




Second, the use of Muffle furnace precautions




When you want to change the specified temperature during use, if the temperature changes from high to low, you need to cut off the power supply. When the pyrometer reading drops below the new predetermined reading, you can rotate the control key to move the fixed temperature indicator to the left on the new predetermined temperature reading, and then switch on the power supply. If the temperature changes from low to high, you must twist the control key to move the fixed temperature indicator to the right on the predetermined temperature reading. Let the pyrometer reading continue to rise.


 


相关资讯

  • Why does the thermostat of the muffle furnace keep heating up?

    Answer: Muffle furnace more than the set temperature 15-20 degrees is normal, in the process of heating, ammeter sometimes drops to zero and there is a normal number, more than the set temperature is too high will automatically cut off the current to …

    2023/3/9 14:38:21
  • How to fill a vacuumed muffle furnace with nitrogen?

    A: Generally speaking, nitrogen is not too dangerous, but the pressure you fill should not exceed the withstand pressure of the furnace. If you connect between the nitrogen cylinder and the furnace body with not a metal pipe but a general hose pressur…

    2023/3/9 14:37:49
  • Common faults and treatment methods of blast drying oven

    Common faults and treatment methods of blast drying oven:No matter what industrys instruments and equipment fail more or less during use, drying ovens are no exception. Here are common failures and how to deal with them:Phenomenon 1: There is no respo…

    2023/3/9 14:36:21
  • Common faults and solutions of muffle furnaces

    Common faults and solutions of muffle furnaces:Turn on the thermocouple: Turn off the power and open the back cover of the muffle furnace.(1) Check whether the thermocouple is screwed to the thermocouple lead and make sure that the two are in good con…

    2023/3/9 14:33:35